![\"\"](\"https:\/\/biosrhythm.com\/wp-content\/uploads\/2023\/01\/539934251173421056-B347Vw7CYAEhYXq-840x630.jpg\")
<\/a><\/figure><\/li><\/ul><\/figure>\n\n\n\n\n\n\n\nI’m following the #ts2068<\/a> switchable ROM guide from @AtkinsonRichard<\/a>. The original guide seems to have gone missing but the Way Back Machine at Archive.org has most of it stored<\/a>. There’s missing pictures but the text is descriptive enough. You’ll need a 27128 and 27256 EPROM (and an EPROM burner) for the new images.<\/p>\n\n\n\n
Screw location on the bottom case is important, there’s different types so pay close attention to which came from where.<\/p>\n\n\n\n
![\"\"](\"https:\/\/biosrhythm.com\/wp-content\/uploads\/2023\/01\/539936457134063616-B349WKVIEAADuAI-840x630.jpg\")
<\/a><\/figure><\/li><\/ul><\/figure>\n\n\n\nInside the TS2068 upper keyboard half is connected via a flex cable. Hoping this slips out easily.<\/p>\n\n\n\n
![\"\"](\"https:\/\/biosrhythm.com\/wp-content\/uploads\/2023\/01\/539938396957708288-B34_HEuIUAAB3Ye-840x630.jpg\")
<\/a><\/figure><\/li><\/ul><\/figure>\n\n\n\nKeyboard flex cable came out OK. Always worried these will tear.<\/p>\n\n\n\n
![\"\"](\"https:\/\/biosrhythm.com\/wp-content\/uploads\/2023\/01\/539940234872381440-B35AyDGIQAApzil-840x630.jpg\")
<\/a><\/figure><\/li><\/ul><\/figure>\n\n\n\nLooks like lots of rework done (yellow jumper wires and caps soldered on), but they all look like this from factory it seems. My TS2068 also makes a “hissing” sound while it’s on. Haven’t been able to figure out the source of the sound yet.<\/p>\n\n\n\n
![\"\"](\"https:\/\/biosrhythm.com\/wp-content\/uploads\/2023\/01\/539940915159109633-B35BZp9IIAEXYoE-840x630.jpg\")
<\/a><\/figure><\/li><\/ul><\/figure>\n\n\n\nFirst stop is the RF modular to re-purpose the RF channel 3\/4 switch as ROM switch. You can access the switch underneath the machine.<\/p>\n\n\n\n
![\"\"](\"https:\/\/biosrhythm.com\/wp-content\/uploads\/2023\/01\/539942600497979392-B35C7xKIgAAr8Xh-840x630.jpg\")
<\/a><\/figure><\/li><\/ul><\/figure>\n\n\n\nSay goodbye to C46, R57, R56, R28, R24, and R58! Without these, the RF output of the TS2068 is rendered inoperative. But there’s already composite video out on the back plus it’s possible to get RGB digital video out as well.<\/p>\n\n\n\n
![\"\"](\"https:\/\/biosrhythm.com\/wp-content\/uploads\/2023\/01\/539948818432008192-B35Ilr-IcAAUVHf-600x800.jpg\")
<\/a><\/figure><\/li><\/ul><\/figure>\n\n\n\nThe TS2068 board modified, top (left) and bottom. Now to install the ROMs and test!<\/p>\n\n\n\n
![\"\"](\"https:\/\/biosrhythm.com\/wp-content\/uploads\/2023\/01\/539968742013550593-B35atZTIUAIff2R-840x630.jpg\")
<\/a><\/figure><\/li>![\"\"](\"https:\/\/biosrhythm.com\/wp-content\/uploads\/2023\/01\/539968742013550593-B35atSBIQAIvwIW-840x630.jpg\")
<\/a><\/figure><\/li><\/ul><\/figure>\n\n\n\nI’m going to wager that this isn’t what the modded TS2068 is supposed to do :-\/<\/p>\n\n\n\n
![\"\"](\"https:\/\/biosrhythm.com\/wp-content\/uploads\/2023\/01\/539970601344307201-B35cZnuIYAEl8I1-840x630.jpg\")
<\/a><\/figure><\/li><\/ul><\/figure>\n\n\n\nHmm. This looks MUCH better. Timex Sinclair 2068 (left) and ZX Spectrum (right) switchable. Not 100% sure what made it start working. May be a cable routing problem underneath?<\/p>\n\n\n\n
![\"\"](\"https:\/\/biosrhythm.com\/wp-content\/uploads\/2023\/01\/539974195078529024-B35fqzUIUAAa6UB-840x630.jpg\")
<\/a><\/figure><\/li>![\"\"](\"https:\/\/biosrhythm.com\/wp-content\/uploads\/2023\/01\/539974195078529024-B35fqtWIgAENjjl-840x630.jpg\")
<\/a><\/figure><\/li><\/ul><\/figure>\n\n\n\nButtoned back up and still works! <\/p>\n\n\n\n
Now that you can run ZX Spectrum games, you still need a way to plug in your joystick. Even though the Timex Sinclair 2068 has two joystick ports already built in, they are mapped to different memory locations and therefore won’t work with most (if not all) ZX Spectrum games.<\/p>\n\n\n\n
In order to use an Atari style joystick with your new “ZX2068”, you need two things.<\/p>\n\n\n\n
First, is an adapter board for the rear port of the TS2068 called a Twister. The TS2068 rear expansion port is not the same (but again very close!) to the ZX Spectrum. The Twister rearranges the pin-out from the TS2068 to be the same as the ZX Spectrum. These show up on eBay from time to time so setup a search alert.<\/p>\n\n\n\n
![\"\"](\"https:\/\/biosrhythm.com\/wp-content\/uploads\/2023\/01\/553003107282857984-B6ypZH8IcAAO0St-840x630.jpg\")
<\/figure><\/li><\/ul><\/figure>\n\n\n\nNext, you need a ZX Spectrum joystick interface. The most popular one is called a Kempston interface. This will plug into the other side of your Twister board. In this picture, a Kempston clone is plugged into the Twister board.<\/p>\n\n\n\n
![\"\"](\"https:\/\/biosrhythm.com\/wp-content\/uploads\/2023\/01\/553988097437077504-B7ApPAkCMAAPboZ-840x630.jpg\")
<\/figure><\/li><\/ul><\/figure>\n\n\n\nSo what’s the first ZX Spectrum game I should play on my US TS2068? I’m going to use this Bluetooth adapter so I can use my iPhone to “play” a cassette of a ZX Spectrum game wirelessly<\/a>.<\/p>\n\n\n\n
![\"\"](\"https:\/\/biosrhythm.com\/wp-content\/uploads\/2023\/01\/539934251173421056-B347Vw7CYAEhYXq.jpg\")
<\/a><\/figure><\/li><\/ul><\/figure>\n\n\n\n\n\n\n\n